How to Test Christmas Lights With a Light Tester
Every editorial product is independently selected, though we may be compensated or receive an affiliate commission if you buy something through our links. Ratings and prices are accurate and items are in stock as of time of publication.
A simple tester helps you fix holiday light strings fast.
One broken bulb on a strand of Christmas lights can render the whole string completely useless. Good news, though: there’s a way to test and fix holiday lights without having to check each bulb individually. This will work for outdoor lights as well as the lights for inside.
Christmas Light Tester
To quickly identify a bad light on a strand, try using a device like the LightKeeper Pro. It’ll identify and oftentimes fix most problems in miniature and icicle light sets (but not the sets of larger lights or LED lights) with a few squeezes of the trigger.
How to Fix the Shunt
Here’s how it works. First, you remove a bulb from an unlit section of your lights. Then you plug the empty socket into the LightKeeper, plug the string into an electric outlet, then squeeze the trigger until the lights turn on. The trigger sends an electric charge through the circuit to repair internal bulb failures. Something called the “shunt” in the bulb is supposed to act as a bypass if a filament fails to complete the circuit. If the shunt fails, it knocks out the lights in the section. The electricity sent by pulling the LightKeeper’s trigger locates and fixes the defective shunt, allowing the rest of your light strand to light up as intended.
Finding a Dead Bulb
If that doesn’t work, you can also use the LightKeeper to locate and replace any defective bulbs that might be keeping your light strand from illuminating. You just hold down the black button on top of the tester and move the tip along the string. The tester will beep every time it senses a functioning bulb. Note where the beeping stops, then replace the previous bulb closest to the plug in.
How to Test When Half the String is Out
Run the tester along each bulb in the part of the strand that’s not working. As you find bad bulbs, mark them, so that you can circle back and replace them once you’ve tested the strand.
How to Tell If the Fuse is Blown
Another problem you might encounter with holiday lights is a blown fuse. Both traditional incandescent and LED light strands have cartridge fuses. They’re typically located in the cord’s plug, hidden behind a sliding door. You might be able to tell if the fuse is blown just by looking at it; just look to see if the filament inside the fuse is broken. If you can’t tell, just test the fuses by replacing them with new ones and seeing if the lights come on.
How to Test Light Bulbs Without a Tester
Without a light tester, you’ll have to take a more intense approach to find a bad bulb. Remove the bulbs from the part of the strand that isn’t working and keep them together. Using a socket on the strand that works, go through and individually insert each bulb into it. If the bulb lights up, it’s good. Set the good ones aside as you test them. Once you’ve identified the bad bulbs, get replacement bulbs and start putting those back into the strand along with the bulbs you just tested.
Don’t use any light stands that have fraying or exposed wires. That can cause fires along with other dangers. It’s best to replace them with a new set. To help cut down on problems next time you get them out of the basement, be sure to store your Christmas lights so that they don’t get tangled up.